Timing belt Optibelt 14M 2800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 14M 2800 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 14M 2800 and any equivalents.
When you need a replacement timing belt, the marking on the back of the old belt is the most reliable starting point. This page covers the Optibelt Omega 14M 2800, an HTD 14M profile belt with a 2800 mm length. Use the steps below to confirm you are specifying the correct belt for your drive.
Read the back of the belt and note the profile and length. This belt carries the Optibelt Omega marking 14M 2800. The profile is HTD 14M and the length is 2800 mm. The 14 mm pitch is a fixed part of the HTD 14M profile, so any belt you compare must share that same profile and length to sit correctly on the pulleys.
If the old marking is worn or missing, check the drive for a nameplate or maintenance record that lists the belt size. You can also measure the belt length and count the teeth to cross-check, but the marking remains the fastest way to avoid a mis-match. Send us the full marking, the profile, and the length from the belt back.
We supply the Optibelt Omega 14M 2800 to maintenance, engineering, and purchasing teams across the United States, Canada, Mexico, and South America. To request a quote, send the part number 14M 2800 by WhatsApp or email. If you are unsure about the profile or length, include a photo of the old belt marking and we will help confirm the right belt.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2800mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of your old belt. It should show the profile HTD 14M and the length 2800 mm. If the marking matches, the belt is the correct size for that drive.
- What if the marking on my old belt is unreadable?
- Look for a drive nameplate or maintenance record that lists the belt size. If none is present, measure the belt length and count the teeth, then send those details along with a photo of the old belt so we can help confirm the profile and length.
- What information do I need to send for a quote?
- Send the part number 14M 2800, or the full marking from the back of the belt, including the profile and length. If you have a photo of the old belt, include it with your request.