Timing belt Optibelt 1480 8M 85 HIPO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1480 8M 85 HIPO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1480 8M 85 HIPO and any equivalents.
The Optibelt 1480 8M 85 HIPO is a timing belt from the Omega High Power series. It has an HTD 8M profile, a length of 1480 mm and an 8 mm pitch. This belt is used in synchronous drives where exact timing and positive engagement are required.
To confirm fit, check that the old belt is marked with the same profile and length. The HTD 8M profile and 1480 mm length must match the drive's pulleys and center distance. If the marking is worn, measure the belt width and count the teeth to verify the profile.
Timing belts in this class are common on industrial equipment such as conveyors, packaging machinery, and process drives. Because the belt is part of a synchronous system, any mismatch in profile or length will affect timing and load capacity. Replace the belt when you see cracking, missing teeth, or exposed cords.
When ordering, send the part number 1480 8M 85 HIPO, along with the profile and length if you have them. If you are unsure, our team can help confirm the correct belt or suggest an equivalent from the Optibelt line we carry.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1480mm
Frequently asked questions
- What does the 1480 8M 85 HIPO part number tell me?
- The part number identifies an Optibelt Omega High Power timing belt with an HTD 8M profile and a 1480 mm length. The 8 mm pitch is the distance between tooth centers. Use these specifications to match your drive.
- How do I confirm this belt fits my drive?
- Check the marking on your old belt for the same profile and length. The HTD 8M profile and 1480 mm length must match your pulleys and center distance. If the marking is unreadable, measure the belt width and count the teeth to verify the profile.
- Can you help if I am not sure about the part number?
- Yes. Send us the part number from your old belt, or the profile and length, and our team will help confirm the right belt or suggest an equivalent from the Optibelt line we carry.