Timing belt Optibelt 1420 D5M 15

OPTIBELT 1420 D5M 15 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1420 D5M 15 and any equivalents.

This Optibelt Omega double-sided timing belt is identified by the code 1420 D5M 15 and has a length of 1420 mm. It is a synchronous belt designed for drives that require teeth on both sides, allowing rotation in either direction or multiple pulleys. Use this page to confirm the belt matches your drive before requesting a quote.

Double-sided timing belts are common in applications where the belt must drive pulleys on both the top and bottom surfaces, such as reversing drives or compact multi-pulley layouts. The Optibelt Omega series is known for its construction and tooth profile, and this belt carries the code 1420 D5M 15. To confirm fit, check that your existing belt is marked with the same code and that the length matches 1420 mm.

When reading the back of the belt, look for the full marking: 1420 D5M 15. The length in millimeters is 1420 mm, and the profile is D5M with a 15 mm width. If the marking is worn, measure the belt length and compare it to 1420 mm, and verify the tooth profile and width against your pulleys. The correct belt should seat properly in the pulley grooves without binding or excessive clearance.

For a quote, send the part number 1420 D5M 15 by WhatsApp or email. Our team can confirm the belt or suggest an equivalent based on the data you provide. If you are replacing multiple belts on the same drive, include the quantity and any other markings from the old belts to help us match them accurately.