Timing belt Optibelt 1360 D8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1360 D8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1360 D8M and any equivalents.
This Optibelt Omega High Power belt is a double-sided timing belt with a 1360 mm length. Double-sided timing belts are used where a drive needs synchronous power taken from both faces of the belt, such as reversing or counter-rotating shaft arrangements. Confirm fit by matching the part number and the 1360 mm length to the belt you are replacing.
On a double-sided timing belt, teeth on both faces drive separate pulleys from the same belt. That suits drives where one motor turns two shafts in opposite directions, or where a reversing section has to stay in step with the main drive. If the old belt is marked 1360 D8M and shows teeth on both sides, this is the same type and length.
Before ordering, read the marking on the back of the old belt and check it against this part number. Measure the length only if the marking is worn away, and check the pulleys for worn teeth, correct alignment and proper tension. A belt that ran loose or hot usually points to a drive problem that should be corrected at the same time.
Send the part number 1360 D8M, the belt marking, and photos of both faces and the drive to MR by WhatsApp or email. The team replies promptly and can confirm this Optibelt belt or suggest an equivalent for your application.
Dimensions
- Length
- 1360mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the part number 1360 D8M and the 1360 mm length to the marking on the belt you are replacing. Also confirm the belt is double-sided, with teeth on both faces, and that the pulley profile matches.
- What should I send for a quote?
- Send the part number 1360 D8M and the marking from the old belt. Photos of the belt and the drive help the team confirm the correct belt or suggest an equivalent.
- What else should I check when replacing this belt?
- Inspect the pulleys for worn or damaged teeth, check shaft alignment, and set tension to the drive manufacturer's specification. Correct any misalignment or tension problem before installing the new belt.