Timing belt Optibelt 1344 D14M SL 285
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1344 D14M SL 285 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1344 D14M SL 285 and any equivalents.
This Optibelt Omega 1344 D14M SL 285 is a double-sided timing belt with a 1344 mm length. The profile and length are the two figures that drive the selection, so confirm both against your drive before you request a quote.
The part number identifies a double-sided timing belt in the Optibelt Omega series. The 1344 mm length is the datum to check first: measure the old belt or read the marking on its back and match the figure exactly. The D14M profile is the other half of the match, so confirm the pulley groove form and pitch on the drive accept that profile before ordering.
Because this is a double-sided belt, teeth are on both faces and the drive uses both sides, which is common where one belt turns two or more pulleys in opposite directions. Inspect both faces for cracked or missing teeth, exposed cord, and glazing, and check pulley wear. If a drive runs more than one belt, replace the set together so the load stays even.
Send the part number 1344 D14M SL 285, the quantity, and a photo of the marking on the belt back if you have one. We carry Optibelt and can confirm the belt or suggest an equivalent from the data you provide.
Dimensions
- Length
- 1344mm
Frequently asked questions
- What does the 1344 mm length refer to on this Optibelt belt?
- It is the belt length given for the 1344 D14M SL 285. Match it to the length marked on the old belt or to your drive measurement, and confirm the D14M profile at the same time.
- How do I know this double-sided timing belt fits my drive?
- Check the profile and the 1344 mm length against the pulley grooves and the old belt. This belt has teeth on both sides, so the drive must be designed to run both faces.
- What should I send to request a quote?
- Send the part number 1344 D14M SL 285, the quantity you need, and any marking from the back of the old belt. We reply by WhatsApp or email.