Timing belt Optibelt 1330 14M SL 500 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1330 14M SL 500 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1330 14M SL 500 HILO and any equivalents.
This Optibelt 1330 14M SL 500 HILO is a timing belt from the Omega High Load series. It has an HTD 14M profile, a 1330 mm length and a 14 mm pitch. Use these three values to match it against the belt you are replacing.
Start with the marking on the back of the old belt. Confirm the profile reads HTD 14M, the length reads 1330 mm and the pitch reads 14 mm. If the old belt is worn or the print is gone, measure the length along the pitch line and count the teeth to verify the pitch before ordering.
The 1330 14M SL 500 HILO is a synchronous belt, so it drives by tooth engagement rather than friction. Inspect the pulleys for worn grooves, debris or misalignment, and check the belt for cracked teeth, exposed cord or separation. Replace the belt before these signs turn into a drive failure.
Send the full part number 1330 14M SL 500 HILO, the profile, length and pitch, and a photo of the old belt's back marking by WhatsApp or email. We carry Optibelt and will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1330mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the back of the old belt for the profile, length and pitch. This belt is HTD 14M, 1330 mm long with a 14 mm pitch. If the marking is unreadable, measure the length and count teeth to verify.
- What should I send to request a quote?
- Send the part number 1330 14M SL 500 HILO, the profile HTD 14M, the length 1330 mm and the pitch 14 mm. A photo of the old belt's marking helps us confirm the match.
- Is this a synchronous belt?
- Yes. The 1330 14M SL 500 HILO is a timing belt, also called a synchronous belt, from the Optibelt Omega High Load series. It drives by tooth engagement on HTD 14M pulleys.