Timing belt Optibelt 1330 14M 40 HIPO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1330 14M 40 HIPO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1330 14M 40 HIPO and any equivalents.
The Optibelt 1330 14M 40 HIPO is an Omega High Power timing belt. It uses the HTD 14M profile with a 1330 mm length and a 14 mm pitch. When you read the marking on the back of the old belt, you can confirm these numbers before requesting a quote.
The marking on a timing belt typically shows the profile, length and width. For this Optibelt belt, the profile is HTD 14M, the length is 1330 mm, and the pitch is 14 mm. The part number 1330 14M 40 HIPO combines these details. If the back of the belt is worn or dirty, clean it carefully and read the characters from left to right. Compare what you find with the data shown here.
If the old belt is too damaged to read, measure the pitch length and check the profile against the pulley grooves. The 14 mm pitch and HTD 14M profile are key details. The 1330 mm length is the pitch length. Send us the complete part number or the marking from the back of the belt. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1330mm
Frequently asked questions
- How do I read the marking on the back of the belt?
- Look for the part number printed on the back. For this belt, it is 1330 14M 40 HIPO. The number 1330 indicates the length in mm, 14M indicates the profile, and 40 indicates the width in mm.
- What details should I send for a quote?
- Send the full part number from the back of the belt, or the profile, length and width. If you have the old belt, a photo of the marking helps. You can contact us by WhatsApp or email.
- Can you help if the marking is unreadable?
- Yes. Measure the pitch length and check the profile against the pulley. The profile is HTD 14M and the pitch is 14 mm. Provide these measurements and we can help confirm the right belt.