Timing belt Optibelt 1328 8M 50 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1328 8M 50 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1328 8M 50 HILO and any equivalents.
The Optibelt 1328 8M 50 HILO is an Omega High Load timing belt in HTD 8M profile. It measures 1328 mm in length with an 8 mm pitch. We carry this belt for maintenance, engineering and purchasing teams who order by part number.
When you pull the old belt off a drive, the marking on the back is the fastest way to confirm what you need. Read it before the belt goes in the trash: the profile and the length are the two values that have to match. For this belt that means HTD 8M and 1328 mm. Write the full code down, including the 50 and HILO portion, and keep it with the machine record.
If the back of the belt is worn, greasy or rubbed blank, the drive itself can still tell you the profile. Count the teeth and measure the pitch across them, then check the pulley grooves against an HTD 8M tooth form. A belt that is close but not correct will not sit properly in the grooves, so confirm the marking rather than matching by eye.
Send the code you read, or the code above, and we will confirm the belt against your request. If you are replacing more than one belt on the same drive, send every position so the set is quoted together.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1328mm
Frequently asked questions
- What should I read off the old belt before ordering?
- Read the full marking printed on the back of the belt. For this belt the code is 1328 8M 50 HILO, which identifies the profile and the length. Send that code as it appears, even if part of it is faint.
- What profile and length is this belt?
- It is an HTD 8M profile timing belt with a length of 1328 mm and a pitch of 8 mm. It is part of the Optibelt Omega High Load series.
- How do I request a quote?
- Send the part number 1328 8M 50 HILO by WhatsApp or email. If you have the old belt in hand, include the marking from the back so we can confirm it matches your request.