V-belt Optibelt 13 x 900 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 900 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 900 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt supplied under the code 13 x 900 Li. It has an A profile, a 900 mm length, a 13 mm top width, an 8 mm height, and a 40-degree angle. When you need to replace a belt on an existing drive, the marking on the back of the old belt is the fastest way to identify what you are running.
Read the old belt before you order. The back of a classical V-belt typically carries the profile and the length code, and on this Optibelt belt that code is 13 x 900 Li. Match the profile A and the 900 mm length to the drive you are servicing. If the marking is worn or unreadable, measure the top width and the outside length of the belt and send those values with the drive details.
The 13 x 900 Li code identifies this belt as a classical V-belt with a 13 mm top width, an 8 mm height, and a 40-degree angle. It is not a narrow wedge belt, a cogged belt, or a synchronous belt. Confirm the profile and length against your drive before ordering, and check the sheaves for wear or damage while the belt is off.
To request a quote, send the part number 13 x 900 Li by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the old belt marking, the sheave dimensions, and the equipment details. The team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 900mm
Frequently asked questions
- How do I identify the correct replacement for my old belt?
- Read the marking on the back of the old belt. For this Optibelt belt, the code is 13 x 900 Li. If the marking is not legible, measure the top width and the outside length and send those values with the drive information.
- What does the code 13 x 900 Li tell me about this belt?
- It is the part number for an Optibelt VB S=C Plus classical V-belt. The belt has an A profile, a 900 mm length, a 13 mm top width, an 8 mm height, and a 40-degree angle.
- What information should I send to request a quote?
- Send the part number 13 x 900 Li by WhatsApp or email. If you want the team to confirm the belt for your drive, also include the old belt marking, the sheave dimensions, and the equipment details.