V-belt Optibelt 13 x 730 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 730 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 730 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with an A profile, a top width of 13 mm, a height of 8 mm, and a 40-degree angle. It is 730 mm long. This belt is used in industrial drives where a classical V-belt is specified.
To confirm fit, compare the profile and length on your existing belt. The markings on the back of the belt should show the profile (A) and the length (730 Li). If the old belt is worn or the marking is unreadable, measure the top width (13 mm) and the outside length to match the 730 mm dimension.
This belt may be used on drives such as fans, pumps, compressors, and other industrial machinery that call for an A-profile classical V-belt. It is not a narrow wedge belt, cogged belt, or banded belt. For drives with multiple belts, replace all belts at the same time to maintain even tension and alignment.
When requesting a quote, send the part number 13 x 730 Li and the quantity you need. If you are unsure about the profile or length, include a photo of the belt marking and the drive setup. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 730mm
Frequently asked questions
- What does the marking on this belt mean?
- The marking 13 x 730 Li indicates a classical V-belt with a top width of 13 mm and a length of 730 mm. The profile is A, and the angle is 40 degrees.
- How do I confirm this belt fits my drive?
- Check that your drive uses an A-profile classical V-belt and that the current belt is marked 13 x 730 Li or measures 13 mm across the top and 730 mm long. If the old belt is stretched or damaged, measure the drive pulley grooves and center distance to verify.
- Can I use this belt on a drive that originally used a different profile?
- No. V-belt profiles are not interchangeable. Use only the profile and length specified for your drive. If you need help identifying the correct profile, send the belt marking and drive details for assistance.