V-belt Optibelt 13 x 4572 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 4572 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 4572 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile and a length of 4572 mm. The 13 mm top width, 8 mm height and 40-degree angle define the cross-section that must match your drive.
The marking 13 x 4572 Li gives you the two dimensions that matter most when selecting a replacement: the 13 mm top width and the 4572 mm length. The A profile and 40-degree angle confirm the belt will sit correctly in a standard A-section pulley groove. Before ordering, verify these values against the old belt or the drive documentation.
If you are matching an existing belt, read the full marking on the back of the belt and compare it with the profile and length above. A belt with the same 13 mm top width and 4572 mm length but a different profile or angle will not run correctly. When you request a quote, send the part number 13 x 4572 Li and, if possible, a photo of the old belt marking.
For drives that use multiple belts, replacing the full set at the same time helps maintain even tension and load sharing. Inspect the pulleys for wear or debris before installation. If you need help confirming this Optibelt belt for your application, our team can review the profile and length you provide.
Dimensions
- Section
- A
- Length
- 4572mm
Frequently asked questions
- What do the numbers 13 x 4572 Li mean on this Optibelt belt?
- The 13 indicates the top width in millimeters, and 4572 indicates the length in millimeters. The Li suffix is part of the belt's marking. Use these values to compare with your existing belt.
- How do I confirm this A-profile belt fits my drive?
- Check that your pulley groove is designed for an A-section belt and that the required length is 4572 mm. The 40-degree angle and 8 mm height are also part of the cross-section. If you are unsure, send us the old belt marking and pulley details.
- What information should I include when requesting a quote?
- Provide the part number 13 x 4572 Li, the quantity, and any details from the old belt or drive. If you have a photo of the belt marking, that helps us confirm the correct profile and length.