V-belt Optibelt 13 x 2311 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 2311 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 2311 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile. The marking 13 x 2311 Li gives you the top width and the length so you can match the belt on the drive. Use these figures when you send your quote request.
The back of an old belt is the fastest place to confirm what you need. Read the full marking before it is discarded: on this belt the code is 13 x 2311 Li. The profile is A, the top width is 13 mm, the height is 8 mm, and the angle is 40 degrees. The length is 2311 mm. A worn or dirty belt can hide part of the marking, so wipe it and check both the top and the sidewalls.
Once you have the marking, compare it with the drive. This belt is a classical V-belt in the Optibelt VB S=C Plus series. The 13 mm top width and 8 mm height identify the cross-section; the 2311 mm length sets the fit around the pulleys. If the old belt is unreadable, measure the top width and the outside length and send those figures with a photo of the drive.
For a quote, send the part number 13 x 2311 Li, the quantity, and any details from the drive nameplate. If you are replacing a set, include the number of belts on the drive so the team can confirm the right belt for each position. We carry Optibelt, and the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2311mm
Frequently asked questions
- What does the marking 13 x 2311 Li tell me?
- It identifies this belt as an A profile with a 13 mm top width and a 2311 mm length. The profile, top width, height, angle, and length are the figures to match to the drive.
- How do I request a quote for this belt?
- Send the part number 13 x 2311 Li by WhatsApp or email, along with the quantity and any drive details. If you have the old belt, include a clear photo of the back marking.
- Can you help if the old belt marking is worn off?
- Yes. Measure the top width and the outside length, note the pulley dimensions if possible, and send those figures with a photo of the drive. The team can help confirm the right belt or suggest an equivalent.