V-belt Optibelt 13 x 2200 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 2200 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 2200 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a profile A cross-section and a 2200 mm length. This page covers the 13 x 2200 Li size. If you are replacing a belt, the marking on the back of the old belt is the first thing to read.
The marking on the back of a worn belt gives you the profile and the length in one line. On this Optibelt VB S=C Plus belt, the code is 13 x 2200 Li: a 13 mm top width, an 8 mm height and a 40 degree angle, with a 2200 mm length. Note that marking down before the belt is removed and compare it with the drive data.
When the marking is worn off or unreadable, measure the old belt and check the drive. Profile A, 13 mm top width and 2200 mm length identify this belt. Send the part number 13 x 2200 Li, or the profile and length you measured, and our team will confirm the belt or suggest an equivalent.
Ordering the correct size keeps the drive running as designed. This classical V-belt is supplied under the Optibelt VB S=C Plus series in profile A. If you are unsure of the size, a photo of the old belt marking or the drive nameplate helps us match it.
Dimensions
- Section
- A
- Length
- 2200mm
Frequently asked questions
- How do I identify the belt I need to replace?
- Read the marking on the back of the old belt. This belt is marked 13 x 2200 Li, which gives the profile and the length. If the marking is gone, measure the top width and the length and send those values.
- What does the 13 x 2200 Li marking mean on this Optibelt belt?
- It identifies the belt size: profile A with a 13 mm top width, 8 mm height and 40 degree angle, and a 2200 mm length. The code is the reference you send when requesting a quote.
- Can you confirm the right belt or suggest an equivalent?
- Yes. Send the part number 13 x 2200 Li, or the profile and length from your old belt, by WhatsApp or email. Our team will confirm the Optibelt VB S=C Plus belt or suggest an equivalent.