V-belt Optibelt 13 x 2150 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 2150 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 2150 Li and any equivalents.
The Optibelt VB S=C Plus classical V-belt in profile A is a 13 x 2150 Li belt for standard industrial drives. Before fitting a new belt, inspect the drive and sheaves so the replacement runs true from the start.
Check sheave grooves for wear, rust, or embedded debris, and confirm the sheaves are aligned. A worn or misaligned groove can damage a new belt quickly. Verify that the drive is locked out before any work.
Confirm the belt marking on the old part: profile A, top width 13 mm, height 8 mm, angle 40 degrees, and length 2150 mm. The Optibelt VB S=C Plus is a classical V-belt built for these dimensions. If the old belt is stretched or damaged, use the marking rather than its current measured length.
Send the part number 13 x 2150 Li by WhatsApp or email to request a quote. The team can confirm the belt or suggest an equivalent. For multiple-belt drives, replace all belts in the set at the same time.
Dimensions
- Section
- A
- Length
- 2150mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, and check alignment between sheaves. Correct any misalignment or groove damage before fitting the new belt.
- How do I identify the correct replacement?
- Read the marking on the back of the old belt. This belt is Optibelt VB S=C Plus, profile A, 13 x 2150 Li. Use those numbers when requesting a quote.
- Can I replace just one belt in a multi-belt drive?
- No. On a multi-belt drive, replace all belts as a set so they share the load evenly. Mixed old and new belts can cause uneven tension and premature failure.