V-belt Optibelt 13 x 2083 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 2083 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 2083 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt with a profile A cross-section and a length of 2083 mm. The marking 13 x 2083 Li gives you the top width and the belt length, so you can match the belt already on the drive.
Start by reading the marking on the back of the old belt. The profile letter tells you the cross-section family, and the length figure follows the profile in the part number. On this belt the profile is A, the top width is 13 mm, the height is 8 mm and the angle is 40 degrees. The length is 2083 mm. Confirm all of these against the belt you are replacing before you order.
If the marking is worn or the belt has been replaced with a different size in the past, measure the drive instead. Check the pulley groove width and the center distance, then compare the result with the profile and length above. A belt that sits too high or too low in the groove will not transmit load correctly.
When you have the part number confirmed, send it to us by WhatsApp or email. We carry the Optibelt VB S=C Plus line, and the team can confirm this belt or suggest an equivalent from the same size listing. Include the profile and length, and note the drive it runs on, so the reply matches the belt you need.
Dimensions
- Section
- A
- Length
- 2083mm
Frequently asked questions
- How do I read the marking on this Optibelt belt?
- The marking 13 x 2083 Li shows the top width and the length. The profile is A, the top width is 13 mm, the height is 8 mm, the angle is 40 degrees and the length is 2083 mm. Use the profile letter and the length to match the belt to the drive.
- What should I send to request a quote?
- Send the part number, 13 x 2083 Li, and the profile, A. If you have the old belt, include the marking from the back. A photo of the drive and the pulley diameters can help confirm the match.
- Can you help if the old belt marking is unreadable?
- Yes. Measure the top width of the old belt and the length around the outside, or measure the pulley grooves and center distance. Send those figures and we can compare them with the profile and length of this belt.