V-belt Optibelt 13 x 1800 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1800 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1800 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile, a top width of 13 mm, a height of 8 mm, a 40-degree angle, and a length of 1800 mm. It is used on industrial drives where a classical V-belt is specified. To match it to the belt you are replacing, compare the profile and length marked on the old belt.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Look for the profile letter and the length. This belt is marked 13 x 1800 Li, which corresponds to an A profile and a length of 1800 mm. If the old belt shows the same profile and length, this Optibelt VB S=C Plus belt is the correct match.
When the marking is worn or missing, measure the old belt. Check the top width and height: this belt has a top width of 13 mm and a height of 8 mm. Also measure the length. The profile and length are the key dimensions for matching a classical V-belt. The 40-degree angle is part of the A profile.
If you are unsure, send us the part number from the old belt or the dimensions you measured. Our team can confirm the right belt for your drive. We carry the Optibelt VB S=C Plus line and can help you match it by profile and length.
Dimensions
- Section
- A
- Length
- 1800mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the old belt for the profile and length. This belt is an A profile with a length of 1800 mm. If the old belt shows the same profile and length, it is a match. You can also measure the top width (13 mm) and height (8 mm) to confirm the profile.
- What should I send to request a quote?
- Send the part number 13 x 1800 Li or the brand and series (Optibelt VB S=C Plus) along with the profile and length. If you have the old belt, include a photo of the marking. Our team will reply promptly with a quote.
- Can you help if the marking on my old belt is unreadable?
- Yes. Provide the dimensions you can measure, such as top width, height, and length, or send a photo of the old belt. We will help identify the correct profile and length for your drive.