V-belt Optibelt 13 x 1300 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1300 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1300 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt in profile A, with a 13 mm top width, 8 mm height, 40 degree angle and 1300 mm length. Classical V-belts in this profile range turn up on a wide spread of industrial drives, from fans and pumps to compressors and conveyors, wherever a single belt runs in a matched groove. The practical question on any replacement is whether the profile and the length match what is on the drive now.
The most reliable way to confirm fit is to read the marking on the back of the belt you are replacing and compare it against the profile and length given here. Profile A sets the cross-section that has to sit correctly in the pulley groove, and 1300 mm sets the length around the drive. A belt that is close but not correct will not run at the right tension or sit properly in the groove.
If the marking is worn off or the belt has been replaced before with something that did not match, measure the drive instead. Note the pulley groove width and the center distance between pulleys, then send those details with the part number. On multi-belt drives, inspect all the belts in the set and the pulley grooves before ordering, since worn grooves or a mix of belt conditions will shorten the life of the new belt.
Send the part number 13 x 1300 Li by WhatsApp or email and we will confirm the right belt or suggest an equivalent. Photos of the old belt marking and the drive help us get it right the first time.
Dimensions
- Section
- A
- Length
- 1300mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Read the marking on the back of the belt you are removing. If it shows profile A and 1300 mm, this belt matches. If the marking is gone, measure the pulley groove and center distance and send those details with your request.
- What does the 13 x 1300 Li marking mean on this belt?
- The 13 refers to the top width in millimeters, and 1300 is the length in millimeters. The profile is A, with an 8 mm height and a 40 degree angle.
- Can you help if I am not sure of the part number?
- Yes. Send the belt marking, or photos of the old belt and the drive, by WhatsApp or email. We will confirm the right belt or suggest an equivalent.