V-belt Optibelt 13 x 1220 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1220 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1220 Li and any equivalents.
Optibelt VB S=C Plus classical V-belt, profile A, with a top width of 13 mm, height of 8 mm, and 40-degree angle. This belt is identified by its 1220 mm length. It is used in industrial drives where a classical V-belt is specified.
Classical V-belts like this Optibelt VB S=C Plus are common on drives that need a reliable, simple power transmission solution. The profile A cross-section and 1220 mm length make it suitable for equipment where the pulley groove and center distance match these dimensions. Typical uses include fans, pumps, compressors, and other machinery that runs at moderate speeds and loads.
To confirm fit, check the old belt's marking for profile and length. The profile A indicates a 13 mm top width and 8 mm height, while the 1220 mm length is the datum length. Also verify the pulley groove angle is 40 degrees. If the old belt is worn or stretched, measure the drive's center distance and pulley diameters to ensure the replacement matches the original specification.
When ordering, provide the part number 13 x 1220 Li and the brand Optibelt. If you need help confirming the right belt or identifying an equivalent, send a photo of the old belt's marking and details of the drive. Our team can assist with selection based on the profile and length.
Dimensions
- Section
- A
- Length
- 1220mm
Frequently asked questions
- What does the marking 13 x 1220 Li mean on this Optibelt belt?
- The marking indicates the belt's profile and length: 13 mm top width, 1220 mm length. The Li suffix refers to the length designation. This belt has a profile A cross-section with a height of 8 mm and a 40-degree angle.
- How do I confirm this classical V-belt will fit my drive?
- Check the old belt for a matching profile and length. This belt is profile A with a 13 mm top width, 8 mm height, and 1220 mm length. Ensure your pulleys have a 40-degree groove angle and that the center distance allows for proper tensioning.
- Can you help me find an equivalent if this exact belt is not what I need?
- Yes. Send us the part number, a photo of the old belt's marking, and the drive details. We can suggest an equivalent based on the profile and length.