V-belt Optibelt 13 x 1180 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1180 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1180 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile, a 13 mm top width, an 8 mm height and a 40-degree angle. Its datum length is 1180 mm. When you replace a belt, start by matching the profile and the length to what is on the drive.
The most reliable way to match this belt is to read the marking on the back of the belt you are removing. If it shows a 13 x 1180 Li size in an A profile, this Optibelt VB S=C Plus belt is the direct match. Check that the width, height and angle agree with the pulley grooves before you order.
If the marking is worn or missing, measure the top width and the outside length of the old belt and note the profile. A belt that is too wide will not sit correctly in the groove, and a belt that is too long will not tension properly. The 13 mm top width and 1180 mm length identify this belt.
Send the part number, the marking from the old belt, or your measurements to our team by WhatsApp or email. We carry Optibelt VB S=C Plus and can confirm the correct belt or suggest an equivalent for your drive.
Dimensions
- Section
- A
- Length
- 1180mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the old belt for an A profile and a 13 x 1180 Li size. If it matches, this belt is the correct replacement. You can also measure the top width and length and compare them to the 13 mm and 1180 mm values.
- What should I send to request a quote?
- Send the part number 13 x 1180 Li, or the marking from the belt you are replacing, or your measurements of the old belt. Our team will confirm the belt and reply by WhatsApp or email.
- Can you help if the old belt marking is unreadable?
- Yes. Measure the top width and the outside length of the old belt and note the profile. Send those details and we will match them to the Optibelt VB S=C Plus belt or suggest an equivalent.