V-belt Optibelt 13 x 1120 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1120 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1120 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with an A profile and a length of 1120 mm. It is used on industrial drives where a classical V-belt is specified, such as fans, pumps, compressors and other machinery. To confirm fit, match the profile and the length to the belt you are replacing.
The belt has a top width of 13 mm, a height of 8 mm and a 40-degree angle. The code 13 x 1120 Li identifies the cross-section and the length. Check the marking on the back of the old belt: if it shows an A profile and 1120 mm, this belt is the correct match. If the marking is worn or unreadable, measure the top width and the outside length of the old belt and compare them to the values above.
Classical V-belts are common on drives that run at moderate speeds and require a reliable, simple transmission. When replacing a belt, inspect the sheaves for wear, cracks or debris, and check the alignment of the pulleys. If a drive uses multiple belts, replace all belts in the set at the same time so they share the load evenly.
To request a quote, send the part number 13 x 1120 Li or the full description Optibelt VB S=C Plus, profile A, 1120 mm. If you are unsure about the profile or length, include a photo of the marking on the old belt and the machine details. Our team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 1120mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. It should show an A profile and a length of 1120 mm. You can also measure the top width (13 mm) and the height (8 mm) and compare them to the values for this belt.
- Can I use this belt on a drive that originally used a different brand?
- Yes, if the profile and length match. This is a classical V-belt with an A profile and a length of 1120 mm. As long as the drive requires those dimensions, this belt can be used.
- What information do you need to quote this belt?
- Send the part number 13 x 1120 Li or the full description: Optibelt VB S=C Plus, profile A, 1120 mm. If you have any doubt, include a photo of the old belt marking and the machine details so we can confirm.