V-belt Optibelt 13 x 1030 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 13 x 1030 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 13 x 1030 Li and any equivalents.
The Optibelt VB S=C Plus is a classical V-belt in profile A with a length of 1030 mm. Its 13 mm top width, 8 mm height and 40 degree angle are given for this belt. Before fitting it, inspect the drive and sheaves so the new belt runs correctly.
Check the sheave grooves for wear, rust, oil or debris, and confirm the grooves match the belt's profile A and 40 degree angle. Look for worn or misaligned sheaves, loose mounting, or damaged guards. Correct any problem before installing the new belt, because a worn groove will not support the belt properly.
The marking 13 x 1030 Li identifies the profile and length, so compare it with the belt you are replacing. If the old belt is worn or stretched, use the marking rather than its current shape. Send the part number and any photos of the drive and the old belt marking for a quote.
When a drive uses multiple belts, replace them as a set so the load stays evenly shared. Check tension after installation and again after the first run-in period. Keep the sheaves clean and aligned to get normal service from the Optibelt VB S=C Plus belt.
Dimensions
- Section
- A
- Length
- 1030mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, rust, oil or debris, and confirm they match the belt's profile A and 40 degree angle. Check alignment, mounting and guards, and correct any issue before installing the new belt.
- How do I confirm this is the right belt for my drive?
- Compare the marking on the old belt with 13 x 1030 Li. This Optibelt VB S=C Plus belt is profile A, 1030 mm long, with a 13 mm top width, 8 mm height and 40 degree angle. If the marking matches, send the part number for a quote.
- What information do you need to quote this belt?
- Send the part number 13 x 1030 Li and the quantity you need. If you are unsure, include the old belt marking and photos of the drive and sheaves so we can help confirm the correct belt.