Timing belt Optibelt 1296 S8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1296 S8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1296 S8M and any equivalents.
This Optibelt Omega High Power timing belt is identified by the part number 1296 S8M. It has a length of 1296 mm and an STD profile. Use this page to confirm that this is the belt your drive requires before you request a quote.
Timing belts in this class are found on drives where the belt teeth mesh with pulleys to keep the shafts synchronized. To confirm fit, compare the marking on the back of your old belt with 1296 S8M. The length is 1296 mm and the profile is STD, so those two values must match what your drive uses.
If the marking is worn or unreadable, check the machine manual or the drive layout. Count the teeth on the old belt and measure its length to compare against the 1296 mm figure. The profile should also be visible on the pulleys or in the parts list.
When you have confirmed the part number, send it to us by WhatsApp or email. We carry the Optibelt 1296 S8M and can help you verify it is the correct belt for your application. Include the machine make and model if you have it.
Dimensions
- Profile
- STD
- Length
- 1296mm
Frequently asked questions
- How do I confirm that the 1296 S8M is the right belt for my drive?
- Check the marking on the back of your current belt. If it reads 1296 S8M, the part number matches. If the marking is not clear, measure the belt length and confirm it is 1296 mm, and verify the profile is STD.
- What does the 1296 mm length refer to?
- The length is the belt's datum length, given here as 1296 mm. It must match the length required by your drive for the belt to fit and tension correctly.
- What information should I send with my quote request?
- Send the part number 1296 S8M and, if possible, the machine make and model or a photo of the old belt's marking. That helps us confirm the belt before we quote.