Timing belt Optibelt 1288 14M 40 HIPO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1288 14M 40 HIPO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1288 14M 40 HIPO and any equivalents.
This Optibelt Omega High Power belt is a timing belt with an HTD 14M profile, a 1288 mm length and a 14 mm pitch. It is used in industrial drives where teeth mesh with matching pulleys to transmit motion without slip. Confirm fit by matching the profile, length and pitch to your drive before ordering.
Timing belts of this type are common on driven equipment such as conveyors, mixers, pumps, compressors and other machinery where the belt runs on toothed pulleys. The HTD 14M profile and 1288 mm length identify the belt's cross-section and circumference; the 14 mm pitch is the distance between tooth centers. If your drive uses a 14M pulley and the belt path measures 1288 mm, this is the correct profile and length.
To confirm fit, read the marking on the back of the old belt and compare it to 1288 14M 40 HIPO. Check the pulley grooves for wear and make sure the belt sits fully seated. When replacing a timing belt, inspect the pulleys and tensioner, and replace belts in sets where the drive uses more than one. If you are unsure, send the part number and a photo of the old belt marking.
We carry the Optibelt 1288 14M 40 HIPO Omega High Power belt. Send the part number by WhatsApp or email to request a quote. Our team replies promptly and can help confirm the right belt for your drive.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1288mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile, length and pitch: HTD 14M, 1288 mm and 14 mm. Also check that the belt width and pulley grooves match your existing setup. If you have the old belt, compare the marking on its back to 1288 14M 40 HIPO.
- What does the 14 mm pitch mean?
- Pitch is the distance between tooth centers. A 14 mm pitch means the belt is designed for pulleys with the same 14 mm pitch. Using a different pitch will not mesh correctly.
- Can you help if I am not sure about the part number?
- Yes. Send the part number you have, along with a photo of the old belt marking and any drive details. We will help confirm the right belt or suggest an equivalent.