Timing belt Optibelt 1264 8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1264 8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1264 8M and any equivalents.
The Optibelt 1264 8M is an Omega High Power timing belt with an HTD 8M profile, a 1264 mm length and an 8 mm pitch. It is used on synchronous drives where the belt teeth mesh with pulley grooves to keep the driven shaft in step with the driver.
On a timing belt drive, the belt profile and length must match the pulleys and the center distance. A belt marked 1264 8M is an HTD 8M belt with a 1264 mm length. Confirm the old belt's marking on the back, count the teeth if needed, and check the pulley grooves against the HTD 8M profile before ordering. If the marking is worn away, measure the length along the belt and compare it with the 1264 mm value.
Timing belts are common on industrial drives such as pumps, compressors, conveyors and machine tools where shaft synchronization matters. Inspect the pulleys for worn grooves, the belt for cracked teeth or exposed cord, and the tension before replacing. If the drive uses more than one belt, replace the full set so the load stays even.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1264mm
Frequently asked questions
- How do I confirm that the Optibelt 1264 8M is the right belt for my drive?
- Look for the marking on the back of the old belt. The 1264 8M code identifies an HTD 8M profile belt with a 1264 mm length. Compare that with the profile and length required by your pulleys and center distance.
- What should I send to request a quote for this belt?
- Send the part number 1264 8M, the brand Optibelt, and the quantity you need by WhatsApp or email. If you are unsure of the profile or length, include the old belt's marking and a photo of the drive.
- Can you help if the marking on my old belt is unreadable?
- Yes. Send the pulley dimensions, the center distance and any remaining markings. The team can help confirm whether the 1264 8M, with its HTD 8M profile and 1264 mm length, matches your drive.