Timing belt Optibelt 1224 8MDC 12
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Delta Chain
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1224 8MDC 12 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1224 8MDC 12 and any equivalents.
The Optibelt 1224 8MDC 12 is a Delta Chain polyurethane timing belt with a length of 1224 mm. Delta Chain belts are used in drives where a standard timing belt may not hold the required tooth engagement, and the polyurethane body is chosen for its resistance in demanding industrial service. This page covers how to confirm that this belt fits your drive before you order.
To confirm fit, read the marking on the back of the belt you are replacing and match it to the part number 1224 8MDC 12. Check that the profile and the 1224 mm length agree with the drive's pulleys and the space between them. If the old belt is worn or the marking is unreadable, measure the length along the back of the belt and count the teeth so the profile can be identified.
Delta Chain polyurethane timing belts are found on drives that need positive synchronization, such as those in packaging, printing, and general power transmission equipment. Because the belt runs on toothed pulleys, the pulley groove profile and the belt profile must match. Inspect the pulleys for wear or damage at the same time; a worn pulley can shorten the life of a new belt.
When you request a quote, send the part number 1224 8MDC 12 and, if possible, a photo of the marking on the old belt. Our team can confirm the belt or suggest an equivalent from the brands we carry. For drives that use more than one belt, replace the set together so the load stays even across the belts.
Dimensions
- Length
- 1224mm
Frequently asked questions
- How do I confirm that the Optibelt 1224 8MDC 12 fits my drive?
- Match the part number on the back of your old belt to 1224 8MDC 12, and check that the profile and the 1224 mm length agree with your pulleys and center distance. If the marking is gone, measure the belt length and count the teeth.
- What should I send with my quote request?
- Send the part number 1224 8MDC 12 and, if you have it, a photo of the old belt's marking. That lets us confirm the belt or point you to an equivalent from the brands we carry.
- Should I replace more than one belt at a time?
- On a drive that uses several belts, replace them as a set. Mixing a new belt with worn ones can leave the load uneven across the drive.