Timing belt Optibelt 1168 8M 30 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1168 8M 30 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1168 8M 30 HILO and any equivalents.
This Optibelt 1168 8M 30 HILO belt is an Omega High Load timing belt with an HTD 8M profile, a length of 1168 mm and a pitch of 8 mm. It is the correct choice when you need to match the belt you are replacing by profile, length and pitch.
To match this belt to the one being replaced, read the marking on the back of the old belt. The part number 1168 8M 30 HILO identifies the profile as HTD 8M, the length as 1168 mm and the pitch as 8 mm. Confirm these values against the drive before ordering, because a belt with the same length but a different profile or pitch will not seat correctly in the pulleys.
If the old belt marking is worn or missing, measure the drive instead. The HTD 8M profile and the 1168 mm length are the critical dimensions for this belt. The 8 mm pitch is set by the pulley grooves, so any replacement must match that pitch exactly. The 30 in the part number refers to the belt width, which must also match the pulley width.
When you request a quote, send the full part number 1168 8M 30 HILO and, if possible, a photo of the old belt marking. Our team can confirm that this Optibelt Omega High Load belt is the right match for your drive or suggest an equivalent if needed.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1168mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it reads 1168 8M 30 HILO, this Optibelt Omega High Load belt matches by profile (HTD 8M), length (1168 mm) and pitch (8 mm). If the marking is unreadable, measure the belt length and check the pulley profile and pitch.
- What does the 30 in the part number mean?
- The 30 indicates the belt width. The width must match the pulley width for the belt to run correctly. If your old belt has a different width, send us that number so we can help you find the correct belt.
- What information should I send to get a quote?
- Send the full part number 1168 8M 30 HILO, along with the quantity you need. If you are unsure about the part number, include a photo of the old belt marking and the drive setup, and we will confirm the match or suggest an equivalent.