Timing belt Optibelt 1160 D8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1160 D8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1160 D8M and any equivalents.
This Optibelt 1160 D8M is a double-sided timing belt from the Omega High Power series. It measures 1160 mm in length. Double-sided timing belts are used where a drive needs synchronized power taken from both faces of the belt, so confirming the original marking and the drive layout before ordering matters.
The 1160 D8M fits drives that turn two shafts in opposite directions from one belt, or that drive an accessory from the back side while the tooth side runs the main pulleys. Before you order, read the marking on the back of the old belt and match it to the part number, profile and length. Check that both pulley faces are toothed to suit a double-sided belt, since a single-sided belt will not run correctly in that layout.
Measure the length only against the figure shown here: 1160 mm. If the belt on the drive is worn, cracked at the teeth or showing exposed cord, replace it before the drive loses timing. Send the part number 1160 D8M and the machine or drive details to our team by WhatsApp or email, and we will confirm the belt or suggest an equivalent.
Dimensions
- Length
- 1160mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing and compare it with 1160 D8M. Also confirm the drive uses a double-sided timing belt and that the length matches 1160 mm.
- What should I send for a quote?
- Send the part number 1160 D8M, along with the drive or equipment details if you have them, by WhatsApp or email. Our team will confirm the belt or suggest an equivalent.
- Can I replace a single-sided timing belt with this double-sided belt?
- Only if the drive is designed for a double-sided belt with toothed pulleys on both faces. Check the pulley layout and the original belt marking before ordering.