Timing belt Optibelt 115 / 14M 8498 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 115 / 14M 8498 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 8498 AFX and any equivalents.
This Optibelt 115 / 14M 8498 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 14 mm pitch and an 8498 mm length. It is used on high-torque industrial drives where synchronous power transmission must be maintained. Confirm fit by matching the profile, pitch and length to the drive and the marking on the belt back.
HTD 14M belts are common on larger driven equipment such as industrial machinery, process lines and plant drives that rely on a positive, non-slip drive. The 14 mm pitch and 8498 mm length identify the belt for the specific pulley arrangement. The Alpha Flex construction is intended for continuous operation on these drives.
To confirm the replacement, read the marking on the back of the old belt and compare it with the profile, pitch and length on this page. Check the pulleys for wear, alignment and correct tooth form, and inspect the drive for any condition that caused the original belt to be replaced. If the marking is worn or unreadable, measure the pitch and the length around the belt path and send those details with your request.
We carry the Optibelt 115 / 14M 8498 AFX and quote by part number. Send the belt marking, the profile, the pitch and the length by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 8498mm
Frequently asked questions
- How do I confirm that this Optibelt 115 / 14M 8498 AFX fits my drive?
- Match the profile, pitch and length to the drive: HTD 14M, 14 mm pitch, 8498 mm length. Also compare against the marking on the back of the belt you are replacing.
- What information should I send to request a quote?
- Send the part number 115 / 14M 8498 AFX, the profile HTD 14M, the pitch 14 mm and the length 8498 mm. If the old belt marking is readable, include it as well.
- What should I inspect when replacing a timing belt on this type of drive?
- Inspect the pulleys for wear and correct tooth form, check alignment, and look for the condition that caused the original belt to be replaced. Addressing those points helps the replacement belt run correctly.