Timing belt Optibelt 115 / 14M 5950 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 115 / 14M 5950 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 5950 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 115 / 14M 5950 AFX. The HTD 14M profile and 5950 mm length are the two dimensions to match when selecting a replacement. Use them to confirm the belt fits your drive before requesting a quote.
The 14M profile is a high-torque drive (HTD) synchronous belt profile with a 14 mm pitch. The 5950 mm length is the belt's datum length. Both values come directly from the belt marking, so you can compare them with the old belt or the drive specification. If the marking on your current belt reads 115 / 14M 5950 AFX, this is the same belt.
When ordering, send the full code 115 / 14M 5950 AFX, the profile HTD 14M, and the length 5950 mm. If you are unsure, a photo of the back of the belt and the drive setup helps confirm the correct part. We carry the Optibelt Alpha Flex line and can check this code against your request.
For drives using more than one belt, replace all belts at the same time to keep load sharing even. Inspect sprockets for wear and make sure the belt is tensioned to the drive manufacturer's specification. The HTD 14M profile and 5950 mm length must match exactly for the belt to seat and run correctly.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 5950mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile HTD 14M indicates a high-torque drive synchronous belt with a 14 mm pitch. The length 5950 mm is the datum length. Together they define the belt's fit on the drive.
- How do I confirm this is the right belt for my drive?
- Check the marking on your old belt. If it reads 115 / 14M 5950 AFX, or if the drive specifies an HTD 14M profile and 5950 mm length, this belt matches. You can also send a photo of the belt and drive for verification.
- What information should I send with my quote request?
- Send the part number 115 / 14M 5950 AFX, the profile HTD 14M, and the length 5950 mm. If you have the old belt, include a photo of the back marking. Our team will confirm the belt for your application.