Timing belt Optibelt 115 / 14M 4704 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 115 / 14M 4704 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 4704 AFX and any equivalents.
This is an Optibelt Alpha Flex timing belt in HTD 14M profile, with a 4704 mm length and a 14 mm pitch. It is the code 115 / 14M 4704 AFX. We carry it for drives where a synchronous belt has to hold position and carry load at the same time.
HTD 14M synchronous belts are used on industrial drives that need positive engagement rather than friction: main and auxiliary drives on process equipment, pumps, compressors, mixers, and similar machinery where the pulley teeth and the belt teeth mesh to keep the driven shaft in step with the driver. Because the profile is HTD 14M and the pitch is 14 mm, the belt only runs correctly on pulleys cut for that same profile and pitch. Confirm the pulley marking before you order.
Start with the marking on the back of the belt you are replacing. If it reads 115 / 14M 4704 AFX, this is the belt. If the marking is worn off, measure the length along the pitch line and confirm the profile from the pulley teeth, then send us the profile, the length, and the width so we can match it. A belt that is close in length but wrong in profile will not seat in the grooves.
Send the part number by WhatsApp or email and we will confirm the belt or suggest an equivalent. A photo of the back marking and of the pulley helps. If the drive runs more than one belt, note how many are on it so the set can be replaced together.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4704mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are removing. If it matches 115 / 14M 4704 AFX, the profile is HTD 14M, the length is 4704 mm and the pitch is 14 mm. Also check that the pulleys are cut for HTD 14M at 14 mm pitch, since the belt will not seat correctly on any other profile.
- What should I send for a quote?
- Send the part number 115 / 14M 4704 AFX, or the profile, length and width if the marking is gone. A photo of the back of the belt and of the pulley helps us confirm the match. If the drive uses more than one belt, tell us how many so we can quote the set.
- Where is this type of belt used?
- HTD 14M synchronous belts are used on industrial drives that need positive engagement, such as process equipment, pumps, compressors and mixers. The teeth mesh with the pulley grooves to keep the driven shaft in step with the driver.