Timing belt Optibelt 115 / 14M 4396 AFX

OPTIBELT 115 / 14M 4396 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 4396 AFX and any equivalents.

This Optibelt Alpha Flex timing belt is identified by its HTD 14M profile and 4396 mm length. The 14 mm pitch defines the tooth spacing, so it must match the pulley groove exactly. Use the part number 115 / 14M 4396 AFX when requesting a quote.

The profile and length are the two critical dimensions. HTD 14M is a high-torque drive profile with a 14 mm pitch, and the 4396 mm length is the datum length for the belt. If the old belt is worn or the marking is unreadable, measure the pitch and the length before ordering. A belt with the same profile but a different length will not fit the drive.

For a accurate quote, send the full part number 115 / 14M 4396 AFX, the profile HTD 14M, and the length 4396 mm. If you are replacing a belt on a drive where the original marking has faded, send photos of the belt and the pulleys, and note the number of teeth on the pulleys. The team can confirm the correct belt or suggest an equivalent.

When replacing a timing belt, inspect the pulleys for wear and check the tensioner. A new belt on worn pulleys can run poorly. If the drive uses more than one belt, replace them as a set to keep the load balanced. Confirm the profile and length before installation.