Timing belt Optibelt 115 / 14M 2506 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 115 / 14M 2506 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 2506 AFX and any equivalents.
The Optibelt 115 / 14M 2506 AFX is an Alpha Flex timing belt with an HTD 14M profile. It has a 2506 mm length and a 14 mm pitch. Use these three values to match the belt you are replacing.
Start with the marking on the back of the old belt. Confirm the profile reads HTD 14M, the length is 2506 mm, and the pitch is 14 mm. The part number 115 / 14M 2506 AFX carries the same profile and length, so it is the correct reference for a direct match.
If the back of the belt is worn or the print is gone, measure the old belt. Count the teeth and check the tooth shape to confirm the HTD 14M profile. Measure the length to confirm 2506 mm. Then compare those values with the profile and length on this page.
When you request a quote, send the part number 115 / 14M 2506 AFX and the quantity you need. If you are unsure, send the old belt marking or your measurements. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2506mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. It should show the HTD 14M profile and a 2506 mm length. The 14 mm pitch is also part of the specification. If those match, the part number 115 / 14M 2506 AFX is the correct reference.
- What should I send to get a quote?
- Send the part number 115 / 14M 2506 AFX and the quantity you need by WhatsApp or email. If you do not have the part number, send the old belt marking or your measured profile, length, and pitch. The team will confirm the right belt or suggest an equivalent.
- Can you help if the old belt marking is unreadable?
- Yes. Measure the old belt to confirm the HTD 14M profile, the 2506 mm length, and the 14 mm pitch. Send those measurements and the team will match them to this belt or recommend an equivalent.