Timing belt Optibelt 115 / 14M 1750 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 115 / 14M 1750 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 1750 AFX and any equivalents.
The Optibelt 115 / 14M 1750 AFX is an Alpha Flex timing belt with an HTD 14M profile, a 1750 mm length and a 14 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs correctly from the first start.
Check the sheaves for worn grooves, burrs or debris, and confirm they are clean and aligned. Look at the shaft bearings and the tensioner, and correct any play or misalignment before the belt goes on. A drive that is not square will damage a new belt quickly.
Confirm the part number on the old belt matches 115 / 14M 1750 AFX, and check the profile and length against the drive. If the marking is unreadable, send the belt code, the sheave tooth count and a photo of the drive. The team can help confirm the right belt or suggest an equivalent.
Replace belts on a multi-belt drive as a set so the load stays even. After fitting, recheck alignment and tension, then run the drive and inspect again. Keep the belt clean and free of oil or debris.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1750mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, burrs or debris, confirm they are aligned, and check bearings and the tensioner for play. Correct any issue before installing the belt.
- How do I confirm this is the right belt for my drive?
- Match the code on the old belt to 115 / 14M 1750 AFX and check the HTD 14M profile and 1750 mm length against the drive. If the marking is not clear, send the belt code and a photo of the drive for confirmation.
- What information do you need for a quote?
- Send the part number 115 / 14M 1750 AFX, the quantity, and any details from the old belt or drive. The team replies by WhatsApp or email.