Timing belt Optibelt 115 / 14M 11606 AFX

OPTIBELT 115 / 14M 11606 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 115 / 14M 11606 AFX and any equivalents.

The Optibelt 115 / 14M 11606 AFX is an HTD 14M timing belt with a 11606 mm length and a 14 mm pitch. It is used in synchronous drives where the belt and pulley teeth mesh to keep the driven shaft in step with the driver. When you need to replace a belt on a machine, start by confirming the profile, pitch and length against the belt you are removing.

The most reliable way to match this belt is to read the marking on the back of the old belt and compare it with the code 115 / 14M 11606 AFX. Check that the profile is HTD 14M, the pitch is 14 mm and the length is 11606 mm. If the old belt is worn, cut or missing, measure the drive instead: count the teeth on the pulleys, confirm the tooth profile, and measure the center distance and pulley diameters to verify the belt length.

Before installing a new belt, inspect the pulleys for worn teeth, debris or misalignment, and check the tensioner and idler bearings. A belt that fails early often points to a drive problem rather than a belt problem. If you are replacing more than one belt on the same drive, or if the drive uses matched belts, replace them as a set to keep the load evenly distributed.

To request a quote, send the part number 115 / 14M 11606 AFX by WhatsApp or email. If you are unsure whether this is the correct belt, include the old belt marking, the machine make and model, and the pulley tooth counts. Our team can confirm the belt or suggest an equivalent.