Timing belt Optibelt 1148 14M 85 HILO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Load
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1148 14M 85 HILO belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1148 14M 85 HILO and any equivalents.
When replacing a timing belt, the most reliable approach is to match the belt you are removing. The Optibelt 1148 14M 85 HILO from the Omega High Load series gives you a clear reference: HTD 14M profile, 1148 mm length, and 14 mm pitch.
Start by reading the marking on the back of the old belt. If it shows 1148 14M 85 HILO, this Optibelt belt is the direct match. The HTD 14M profile and 1148 mm length identify the tooth geometry and the belt length, while the 14 mm pitch confirms the tooth spacing.
If the old belt is worn or the marking is unreadable, measure the length and check the profile. A belt with the same profile and length is what you need. The Omega High Load construction is suited to drives where the original belt carried a comparable load.
For a quote, send the part number 1148 14M 85 HILO, or the profile and length you measured. If you are unsure, our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 1148mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the marking on your old belt. If it reads 1148 14M 85 HILO, this Optibelt belt matches. Alternatively, verify the profile (HTD 14M) and length (1148 mm) from your drive documentation or by measuring the old belt.
- What does the 14M profile mean?
- 14M is the HTD profile designation. The pitch is 14 mm, which is the distance between tooth centers. This profile is used in many industrial synchronous drives.
- What information do you need to quote this belt?
- Send the part number 1148 14M 85 HILO. If you do not have it, provide the profile and length, and any other markings from the old belt. Our team will confirm the belt or suggest an equivalent.