Timing belt Optibelt 10T2.5/277
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Torque / Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 10T2.5/277 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 10T2.5/277 and any equivalents.
The Optibelt 10T2.5/277 is a timing belt in the T2.5 profile with a 277 mm length and a 2.5 mm pitch. Before fitting it, inspect the drive so the new belt runs true from the start.
Check the sheaves for worn tooth flanks, debris in the grooves and any runout or misalignment. Confirm the shafts turn freely and that bearing play has not opened up. A drive that is out of line or worn will shorten the life of any timing belt, including this Optibelt T2.5 belt.
Set the correct tension for the drive and rotate it by hand through at least two full revolutions before running under load. Watch the belt as it enters and leaves each sheave; it should track without climbing or rubbing. If the old belt failed early, correct the cause before installing the 10T2.5/277.
The belt is identified by its marking and by the T2.5 profile and 277 mm length. If you are replacing a belt on a drive you have not serviced before, note the profile and length on the old part and compare them with this belt.
Dimensions
- Profile
- T2.5
- Pitch
- 2.5mm
- Length
- 277mm
Frequently asked questions
- What should I check on the drive before fitting the Optibelt 10T2.5/277?
- Inspect the sheaves for worn or damaged teeth, clean the grooves, check alignment and runout, and confirm the shafts and bearings turn freely. Correct any issue before installing the new belt.
- How do I identify this belt on the drive?
- Use the marking on the belt and confirm the T2.5 profile and 277 mm length. The part number is 10T2.5/277.
- How do I request a quote for this belt?
- Send the part number 10T2.5/277 by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.