Timing belt Optibelt 1068 3M 15
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- HTD
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1068 3M 15 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1068 3M 15 and any equivalents.
The Optibelt 1068 3M 15 is an HTD timing belt with a 3 mm pitch and a 1068 mm length. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or embedded debris, and confirm they are clean and aligned. Look for oil, coolant or dust that can shorten belt life, and correct any leakage before installation. Verify that the sheave teeth match the HTD 3M profile and that the flanges are not bent or rubbing.
Inspect the rest of the drive: bearing play, shaft end-float, tensioner condition and mounting bolt tightness. A worn bearing or a loose mount can cause the belt to track off or wear quickly, even when the belt itself is correct. If you are replacing a failed belt, find out why it failed before you install the new one.
The Optibelt 1068 3M 15 carries the profile and length on the back of the belt, so you can compare it directly with the belt you are removing. Send the part number and a photo of the old belt marking to MR by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- HTD 3M
- Pitch
- 3mm
- Length
- 1068mm
Frequently asked questions
- What do I need to send for a quote on the Optibelt 1068 3M 15?
- Send the part number 1068 3M 15, the profile HTD 3M and the length 1068 mm by WhatsApp or email. A photo of the marking on the back of the old belt helps confirm the match.
- What should I check on the drive before fitting this timing belt?
- Inspect the sheaves for wear, damage and alignment, and check bearings, tensioners and mountings. Clean the drive and remove any oil or debris that could affect the new belt.
- How do I read the size on the Optibelt 1068 3M 15?
- The belt is marked with its profile and length. The 1068 3M 15 designation corresponds to an HTD 3M profile, a 1068 mm length and a 3 mm pitch.