Timing belt Optibelt 1064 8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 1064 8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1064 8M and any equivalents.
When you need to replace a timing belt, the marking on the back of the old belt is your starting point. This page covers the Optibelt 1064 8M from the Omega High Power series, a timing belt with an HTD 8M profile, a length of 1064 mm and an 8 mm pitch. Use the data here to confirm that the belt on your drive matches before you request a quote.
The 1064 8M is a synchronous belt, so it relies on tooth engagement rather than friction. Its profile is HTD 8M, its length is 1064 mm and its pitch is 8 mm. These three values, together with the part number, are what you should compare against the old belt. If the marking is worn or unreadable, measure the length and count the teeth to verify the profile.
Because timing belts are often replaced as part of scheduled maintenance, it is good practice to inspect the pulleys and the rest of the drive at the same time. Look for worn teeth, cracks, or glazing on the belt, and check that the pulleys are clean and aligned. If the drive uses more than one belt, replace them as a set to keep the load balanced.
To request a quote, send us the part number 1064 8M, the brand Optibelt, and the series Omega High Power. If you have the old belt, include a photo of the back marking and the tooth profile. Our team will confirm the belt or suggest an equivalent based on the profile, length and pitch you provide.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1064mm
Frequently asked questions
- How do I read the marking on my old timing belt?
- Look for the part number and profile on the back of the belt. For this belt, you should see 1064 8M, which indicates an HTD 8M profile and a 1064 mm length. If the marking is unclear, measure the length and check the tooth pitch.
- What does the 8M in the profile mean?
- The 8M refers to the tooth pitch of the HTD profile. This belt has an 8 mm pitch, meaning the distance from one tooth center to the next is 8 mm. The profile and pitch must match the pulleys on your drive.
- Can you help me confirm this is the right belt for my drive?
- Yes. Send us the part number 1064 8M, along with the old belt's marking or a photo. We will check the profile, length and pitch against your data and help you confirm the correct belt or an equivalent.