Timing belt Optibelt 1040 D8MHP 20

OPTIBELT 1040 D8MHP 20 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1040 D8MHP 20 and any equivalents.

The Optibelt 1040 D8MHP 20 is a double-sided timing belt from the Omega HP series. It is used where a synchronous drive needs teeth on both faces, and it is identified by its profile and its 1040 mm length. This page covers how to match it to the belt you are replacing.

The most reliable way to match this belt is to read the marking on the back of the belt currently on the drive. Look for the part number and confirm the profile and the length. The 1040 D8MHP 20 is a double-sided timing belt, so both faces carry teeth. A single-sided belt of the same length will not fit a drive that requires a double-sided belt, and the reverse is also true.

Once you have the number from the old belt, compare it with the profile and the 1040 mm length shown here. If the marking is worn or unreadable, measure the outside length and count the teeth on one face. Note that this is a double-sided belt, so the tooth profile on both sides matters. Send the part number, the profile and the length to our team, and we will help confirm the belt or suggest an equivalent.

For a quote, send the part number 1040 D8MHP 20 by WhatsApp or email. Include the quantity and any drive details you have, such as the sprocket sizes or the center distance. If you are replacing more than one belt on the same drive, list each part number separately so we can check them together.