Timing belt Optibelt 100 T5 / 2800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 T5 / 2800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 T5 / 2800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 100 T5 / 2800 AFX. It uses a T5 profile with a 5 mm pitch and a 2800 mm length. Use the markings on the belt and the drive data to confirm it matches your application.
Timing belts in the T5 profile are common on drives where synchronous motion is required and space is limited. The 5 mm pitch and 2800 mm length define the geometry of this belt, so the drive's pulleys and center distance must be built for that pitch and length before installation.
To confirm fit, read the existing belt. Check that the back of the belt shows the same profile, pitch and length, and that the width matches the pulley groove. If the old belt is worn or the marking is unreadable, measure the drive: count the pulley teeth, note the tooth profile, and measure the belt length along the pitch line. Any mismatch in profile or length will affect how the belt seats and tracks.
When you request a quote, send the full code 100 T5 / 2800 AFX and the quantity you need. If you are replacing more than one belt on the same drive, list all positions so we can help you match each one. Our team replies by WhatsApp or email and can confirm the right belt or suggest an equivalent from what we carry.
Dimensions
- Profile
- T5
- Pitch
- 5mm
- Length
- 2800mm
Frequently asked questions
- How do I confirm this T5 timing belt fits my drive?
- Check the existing belt marking for T5 profile, 5 mm pitch and 2800 mm length. Also confirm the belt width matches the pulley grooves. If the marking is gone, measure the pulley tooth profile and the belt length along the pitch line.
- What information should I send with my quote request?
- Send the full part number 100 T5 / 2800 AFX, the quantity, and any drive details you have, such as pulley tooth count or the position on the machine. If you are replacing multiple belts, list each one.
- Can you help if I am not sure this is the correct belt?
- Yes. Send the marking from your old belt or the drive details, and our team will help confirm the right belt or suggest an equivalent from what we carry.