Timing belt Optibelt 100 T20 / 2800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 T20 / 2800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 T20 / 2800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by its T20 profile and 2800 mm length. The 20 mm pitch defines the tooth spacing, so the belt must match the drive's pulleys. Use these three values to confirm the correct part before ordering.
The part number 100 T20 / 2800 AFX combines the T20 profile with a 2800 mm length. The T20 profile is a synchronous belt profile, and the 20 mm pitch is the distance from one tooth center to the next. When you check a drive, confirm that the old belt's marking shows the same profile and length. If the marking is worn or unreadable, measure the pitch and the overall length to compare against these figures.
For a quote, send the complete part number 100 T20 / 2800 AFX, along with the quantity you need. If you are replacing a belt on a drive that uses more than one belt, note the number of belts in the set so we can quote accordingly. Our team can help confirm this Optibelt belt matches your application or suggest an equivalent based on the profile and length you provide.
Dimensions
- Profile
- T20
- Pitch
- 20mm
- Length
- 2800mm
Frequently asked questions
- What do the T20 and 2800 mm mean on this Optibelt belt?
- T20 is the profile, and 2800 mm is the length. The pitch is 20 mm, which is the center-to-center distance between teeth. These values must match your drive's pulleys and layout.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the profile and length. If it reads T20 and 2800 mm, this belt matches those dimensions. You can also measure the pitch and length and compare them to the values above.
- What information should I send to request a quote?
- Send the part number 100 T20 / 2800 AFX, the quantity, and the number of belts in the drive if it uses a set. If you have the old belt's marking, include that as well so we can confirm the match.