Timing belt Optibelt 100 / H 2835 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 / H 2835 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 / H 2835 AFX and any equivalents.
When replacing a timing belt, the most reliable match is the belt you are removing. This Optibelt Alpha Flex belt, part number 100 / H 2835 AFX, has an H profile and a length of 7200.9 mm. Use those two values to confirm it fits your drive before you order.
Start by reading the marking on the back of the old belt. You are looking for the profile and the length, not just a catalog number that may have worn away. The H profile and 7200.9 mm length shown here are the critical dimensions. If your old belt carries the same marking, this Optibelt Alpha Flex belt is the correct replacement.
If the marking is unreadable, measure the old belt. With the belt laid flat, measure the outside circumference and compare it to 7200.9 mm. Check the tooth profile against an H profile. When the profile and length match, the belt will run correctly on the same pulleys.
For a quote, send the part number 100 / H 2835 AFX, or send the profile and length from your old belt. Our team can confirm the belt or suggest an equivalent. We supply maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
Dimensions
- Profile
- H
- Length
- 7200.9mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt. It should show an H profile and a length of 7200.9 mm. If those match, this Optibelt Alpha Flex belt is the correct replacement.
- What if the old belt marking is worn off?
- Measure the old belt. Lay it flat and measure the outside circumference. Compare that to 7200.9 mm and check that the tooth profile is H. If both match, the belt will fit.
- What information should I send for a quote?
- Send the part number 100 / H 2835 AFX, or send the profile and length from your old belt. If you have photos of the marking, include those as well. We will reply promptly with a quote.