Timing belt Optibelt 100 AT5 / 8600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT5 / 8600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT5 / 8600 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 100 AT5 / 8600 AFX. It uses an AT5 profile with a 5 mm pitch and an 8600 mm length. It is a synchronous belt for drives that require precise timing between the pulley teeth and the belt.
Timing belts like this Optibelt Alpha Flex are used on industrial drives where the belt must maintain a fixed relationship between two or more shafts. Common examples include camshaft drives, pump drives, and positioning axes on production machinery. The AT5 profile and 5 mm pitch are suited to compact pulleys with fine tooth spacing.
To confirm fit, compare the markings on the back of your existing belt with the code 100 AT5 / 8600 AFX. Check that the profile is AT5, the pitch is 5 mm, and the length is 8600 mm. Also verify the belt width and the number of teeth on each pulley, because a belt with the same profile and length can differ in width.
If you are replacing a belt on a drive that uses more than one belt, inspect all belts for wear and replace them as a set. Check pulley teeth for wear, alignment, and tension. For a quote, send the part number 100 AT5 / 8600 AFX and the quantity you need by WhatsApp or email.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 8600mm
Frequently asked questions
- How do I confirm that this Optibelt belt fits my drive?
- Read the marking on the back of the belt you are replacing and compare it with 100 AT5 / 8600 AFX. Confirm the profile is AT5, the pitch is 5 mm, and the length is 8600 mm. Also check the belt width and pulley tooth count.
- What information should I send to request a quote?
- Send the part number 100 AT5 / 8600 AFX, the quantity you need, and any details from the old belt marking. If you are unsure, include a photo of the belt and the drive pulleys.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, it is good practice to replace all belts at the same time. Mixed wear can affect tension and load sharing. Inspect the pulleys for wear and alignment before installing new belts.