Timing belt Optibelt 100 AT20 / 8800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT20 / 8800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT20 / 8800 AFX and any equivalents.
The Optibelt 100 AT20 / 8800 AFX is an Alpha Flex timing belt with an AT20 profile, an 8800 mm length and a 20 mm pitch. When you are replacing a belt on a drive, this page gives you the identifiers to match against the belt in your hand and the data to send us for a quote.
Start with the marking on the back of the belt you are replacing. Confirm the profile reads AT20, then confirm the length is 8800 mm and the pitch is 20 mm. If the old belt is worn, cut, or the print has rubbed off, measure the length along the belt and check the tooth profile against the AT20 designation before you request a replacement.
The part number to quote is 100 AT20 / 8800 AFX. This belt is part of the Optibelt Alpha Flex series and is a timing belt, so it is used where synchronous drive is required. Send us the part number, the profile, the 8800 mm length and the 20 mm pitch, and we will confirm the belt against your request. If you need help reading a worn marking or checking the profile, send a photo of the back of the belt with your message.
For a quote, include the part number 100 AT20 / 8800 AFX and the quantity you need. If you are replacing belts on more than one drive, list each belt separately so we can check each one. You can reach us by WhatsApp or email, and we will reply promptly.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 8800mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. The profile should read AT20, the length should be 8800 mm and the pitch should be 20 mm. If those match, quote the part number 100 AT20 / 8800 AFX.
- What information should I send with my quote request?
- Send the part number 100 AT20 / 8800 AFX, the quantity, and the profile, length and pitch from the old belt. If the marking is hard to read, include a photo of the back of the belt.
- Can you help if I am not sure about the profile?
- Yes. Send us the part number and any photos or measurements you have. We will check the AT20 profile, 8800 mm length and 20 mm pitch against your request and reply promptly.