Timing belt Optibelt 100 AT20 / 5600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT20 / 5600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT20 / 5600 AFX and any equivalents.
The Optibelt 100 AT20 / 5600 AFX is an Alpha Flex timing belt with an AT20 profile, a 5600 mm length and a 20 mm pitch. When you are replacing a belt on a drive, matching these three figures to the belt in hand is the first check. We carry this belt for maintenance, engineering and purchasing teams.
Start by reading the marking on the back of the belt you are removing. Confirm the profile reads AT20, the length reads 5600 mm and the pitch reads 20 mm, then compare each figure with this Optibelt 100 AT20 / 5600 AFX. A belt that has run for a long time can be difficult to measure accurately, so the marking is the most reliable reference.
If the marking is worn away, measure the old belt and check the drive's pulleys and layout before ordering. The profile must match the pulley grooves and the pitch must match the tooth spacing. The 5600 mm length and 20 mm pitch on this belt are fixed values, so any difference in the old belt's figures points to a different part.
Send the part number, the belt marking and a photo of the old belt if you have one. Our team can confirm the right belt or suggest an equivalent from what we carry. If you are replacing more than one belt on the same drive, include those part numbers in the same request.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 5600mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt being replaced. The profile should read AT20, the length 5600 mm and the pitch 20 mm. If those figures match this Optibelt 100 AT20 / 5600 AFX, the belt is the correct size.
- What should I send to request a quote?
- Send the part number 100 AT20 / 5600 AFX by WhatsApp or email. If you are not sure of the part number, include the marking from the old belt, the profile, length and pitch, and a photo of the belt.
- Can you help if the marking on my old belt is unreadable?
- Yes. Send the drive details and measurements you can take from the old belt, along with photos of the belt and pulleys. We will help confirm the right belt or suggest an equivalent from what we carry.