Timing belt Optibelt 100 AT20 / 3000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT20 / 3000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT20 / 3000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt carries the code 100 AT20 / 3000 AFX. It is a synchronous belt with an AT20 profile, a 3000 mm length, and a 20 mm pitch. Use these three values to match it against the belt you are replacing.
Start with the marking on the back of the old belt. If it reads 100 AT20 / 3000 AFX, this is the same belt. If the profile is AT20 and the length is 3000 mm with a 20 mm pitch, the size matches even when the printed code differs. Confirm the profile and length before ordering.
When the old marking is worn or unreadable, measure the belt and check the drive. The profile must match the pulley grooves and the length must suit the drive layout. Send the part number, profile, and length with your request for a quote, and we will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 3000mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for 100 AT20 / 3000 AFX. If it is unreadable, confirm the profile is AT20, the length is 3000 mm, and the pitch is 20 mm. Send those details with your quote request.
- What information should I send for a quote?
- Send the part number 100 AT20 / 3000 AFX, or the profile AT20, length 3000 mm, and pitch 20 mm from the old belt. We will confirm the Optibelt Alpha Flex belt or suggest an equivalent.
- Can you help if the old belt marking is worn off?
- Yes. Measure the belt and note the profile and length. If the profile is AT20 and the length is 3000 mm with a 20 mm pitch, we can match it to this belt.