Timing belt Optibelt 100 AT10 / 6200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT10 / 6200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT10 / 6200 AFX and any equivalents.
The Optibelt 100 AT10 / 6200 AFX is an Alpha Flex timing belt in the AT10 profile, 6200 mm long with a 10 mm pitch. Before you fit it, the drive itself deserves a look, since worn sheaves will shorten the life of any new belt. We carry this belt and quote it by part number.
Start with the sheaves. Check the tooth flanks for wear, the grooves for embedded debris, and the bore and keyway for movement. A sheave that has worn out of profile will not mesh correctly with a new belt, and the belt will run hot or track poorly from the first day. Confirm the shafts turn freely and that the tensioner, if the drive has one, moves through its full range.
Then confirm alignment. Set a straightedge or laser across the two sheave faces and check that they are parallel and in line. Misalignment pulls the belt to one side of the flange and wears the edge. Check the structure that carries the sheaves for cracks or loose mounting bolts, and verify that the center distance matches the belt you are replacing.
The Optibelt 100 AT10 / 6200 AFX is an Alpha Flex timing belt, AT10 profile, 6200 mm long, 10 mm pitch. If you are replacing an existing belt, send the part number from the back of the old belt and we will confirm it against this one.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 6200mm
Frequently asked questions
- What are the profile and length of this belt?
- The Optibelt 100 AT10 / 6200 AFX is an AT10 profile timing belt, 6200 mm long with a 10 mm pitch.
- What should I check on the drive before fitting it?
- Inspect the sheave tooth flanks and grooves for wear or debris, confirm the shafts turn freely, check sheave alignment with a straightedge, and verify the center distance.
- How do I request a quote?
- Send the part number 100 AT10 / 6200 AFX by WhatsApp or email. If you have the marking from the old belt, include that as well so we can confirm the match.