Timing belt Optibelt 100 AT10 / 3000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT10 / 3000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT10 / 3000 AFX and any equivalents.
The Optibelt 100 AT10 / 3000 AFX is an Alpha Flex timing belt with an AT10 profile, a 3000 mm length and a 10 mm pitch. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or build-up in the tooth spaces. Confirm the sheaves are aligned and the shafts turn freely, then look at the tensioner and any idler for rough bearings or a worn surface. A drive that is out of alignment or has damaged sheaves will shorten the life of any belt, including this one.
Read the marking on the back of the old belt and match it to the Optibelt 100 AT10 / 3000 AFX: AT10 profile, 3000 mm length, 10 mm pitch. If the old belt is worn or the marking is unreadable, measure the drive and confirm the profile and length before ordering. Send the part number, the belt marking or your machine details to MR by WhatsApp or email for a quote.
When you replace a timing belt, check the whole drive rather than only the belt. Inspect the sheaves, the tensioner and the idlers, and correct any alignment or wear issues before fitting the new belt. This keeps the replacement running correctly and avoids a repeat failure.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 3000mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for worn grooves, burrs and build-up, check alignment and shaft rotation, and examine the tensioner and idlers for wear. Correct any problems before you fit the Optibelt 100 AT10 / 3000 AFX.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare it with the AT10 profile, 3000 mm length and 10 mm pitch of the Optibelt 100 AT10 / 3000 AFX. If the marking is unreadable, measure the drive and send the details to MR for confirmation.
- What information do I need to send for a quote?
- Send the part number Optibelt 100 AT10 / 3000 AFX, or the marking from your old belt, along with the machine or drive details. MR will reply by WhatsApp or email.