Timing belt Optibelt 100 AT10 / 1800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT10 / 1800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT10 / 1800 AFX and any equivalents.
When you need to match a timing belt to the one being replaced, start with the marking on the back of the old belt. The Optibelt 100 AT10 / 1800 AFX from the Alpha Flex series gives you the profile and length to compare directly. This page covers what to check before you request a quote.
This is an Optibelt timing belt with profile AT10, a length of 1800 mm and a pitch of 10 mm. It belongs to the Alpha Flex series. To confirm it matches the belt coming off the drive, read the profile and length from the old belt's back marking and compare them with these values. If the profile and length agree, the belt is the correct size for that position.
Before ordering, inspect the drive: check pulley teeth for wear or damage, confirm the belt width and tooth profile, and verify alignment and tension. If the old belt is worn or damaged, replace it rather than reinstalling it. When a drive uses more than one belt, fit the full set at the same time so the load stays even.
If the marking on the old belt is unreadable, send us the part number you have, plus photos of the belt and the drive. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent. Request a quote by part number through WhatsApp or email and the team will reply promptly.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 1800mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the profile and length from the back of the old belt and compare them with AT10 and 1800 mm. If both match, this is the correct size for that position.
- What should I check on the drive before replacing a timing belt?
- Inspect pulley teeth for wear or damage, confirm the belt width and tooth profile, and check alignment and tension. If multiple belts are used, replace the full set.
- What information do I need to send for a quote?
- Send the part number, Optibelt 100 AT10 / 1800 AFX, along with photos of the old belt and the drive if the marking is unreadable. We will help confirm the right belt or suggest an equivalent.