Timing belt Optibelt 100 AT10 / 11800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 100 AT10 / 11800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 100 AT10 / 11800 AFX and any equivalents.
The Optibelt 100 AT10 / 11800 AFX is an Alpha Flex timing belt with an AT10 profile, a 10 mm pitch and an 11800 mm length. Before you fit a replacement, inspect the drive and sheaves so the new belt runs true and reaches its expected service life.
Check the sheaves for worn grooves, burrs, corrosion or embedded debris, and confirm that the flanges are not bent or rubbing. Misaligned shafts or a sheave that is loose on its taper will shorten belt life regardless of the belt's condition. Clean the grooves and verify that the sheave teeth match the AT10 profile and 10 mm pitch of the Optibelt 100 AT10 / 11800 AFX.
Confirm the belt path, tensioner condition and any idler bearings before installation. A tensioner that does not move freely or an idler with play will affect tracking on a belt of this length. Record the part number from the back of the old belt and compare it with the Optibelt 100 AT10 / 11800 AFX so the profile, pitch and 11800 mm length match the drive.
For a quote, send the part number 100 AT10 / 11800 AFX by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the old belt marking and a photo of the drive, and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 11800mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, burrs or debris, confirm they are aligned and secure, and check that the tensioner and idlers move freely. Correct any issues before fitting the Optibelt 100 AT10 / 11800 AFX.
- How do I confirm this is the right belt for my application?
- Compare the marking on the back of the old belt with the Optibelt 100 AT10 / 11800 AFX. The profile is AT10, the pitch is 10 mm and the length is 11800 mm. If the marking is unclear, send us the details and we will help confirm.
- How do I request a quote for this belt?
- Send the part number 100 AT10 / 11800 AFX by WhatsApp or email. If you need help identifying the correct belt, include the old belt marking and a photo of the drive.